InspectMind AI logo InspectMind

For US architects, engineers and permit expediters

AI Building Codes Checker

Check your drawings against the codes your jurisdiction enforces before permit submittal. Each finding names the code section and the sheet.

Checks against IBC, IRC, IEBC, IFC, IECC, IMC and IPC (2012/2015 through 2024 editions) and NFPA 70 (NEC) 2017

See the exact price for your set

Upload your PDFs. Sets over 10 drawing pages get an exact price before anything runs, from $49. 5+ issues or a full refund.

  • Used by 600+ engineering, architecture, construction and development firms
  • ·US-hosted on AWS
  • ·Every finding cited to the sheet and code section
“InspectMind caught 47 critical issues on our cold storage project: conflicts that would have cost us millions in field rework. It paid for itself on the first review.”
Aaron Bass, Director of Construction, Cold Summit Development

Sample findings

  • CriticalConcrete

    2,500 psi concrete specified for F1 freeze-thaw exposure

    Concrete notes assign footings and slab on grade to exposure class F1 but specify 2,500 psi. F1 requires 3,500 psi for structural concrete, and the CBC sets 3,000 psi even for nonstructural concrete.

    Sheets:
    S0.2
    Reference:
    ACI 318-19 Table 19.3.2.1; CBC 2022 §1904.2
    If missed:
    A plan check correction, or footings and slab poured below the required strength.

    From a check on an in-house drawing set

  • HighEgress

    Group A exits serving 50+ occupants have no panic hardware

    Exits serving 105 and 64 occupants get a lever with a privacy lockset. The hardware schedule defines a panic set, but no door is assigned to it.

    Sheets:
    A202, A206.1, G100
    Reference:
    CBC 2022 §1010.2.9
    If missed:
    A failed fire inspection and panic hardware retrofitted before occupancy.

    From a check on an in-house drawing set

  • HighFoundations

    One-third soil bearing increase allowed for all wind and seismic cases

    General notes allow a 1/3 bearing increase for any transient load and cite §1806.3.2, which covers lateral sliding. The IBC allows the increase only with the alternative ASD load combinations.

    Sheets:
    S101
    Reference:
    IBC 2021 §1806.1
    If missed:
    A plan check correction and resized footings.

    From a check on an in-house drawing set

Why Building Code Violations Cost So Much

Building code compliance reviews analyze construction drawings for compliance with IBC, state codes, NFPA, and local codes. One violation can cause significant rework costs.

Code violations discovered during inspection can halt construction and require extensive redesign, making early detection critical.

Common issues that lead to costly rework:

  • IBC and state building code violations
  • NFPA code compliance gaps
  • Local building code violations
  • Fire rating specification conflicts
  • Egress requirement violations
  • Accessibility code compliance gaps
  • Occupancy classification inconsistencies

What the AI Building Codes Checker Catches

AI reviews construction drawings for code compliance to identify issues that manual review might miss.

IBC and State Building Code ComplianceNFPA Code ComplianceFire Rating and Egress IssuesAccessibility Code ComplianceLocal Building Code ComplianceSpecialty Code Compliance
  1. 1IBC code violations
  2. 2State building code conflicts
  3. 3Occupancy classification inconsistencies
  4. 4Construction type specification conflicts
  5. 5Building code requirement gaps
  1. 1NFPA fire code violations
  2. 2NFPA life safety code conflicts
  3. 3NFPA sprinkler code compliance gaps
  4. 4NFPA fire alarm code violations
  5. 5NFPA code requirement deficiencies
  1. 1Fire rating specification conflicts
  2. 2Egress width violations
  3. 3Egress route conflicts
  4. 4Fire rating assembly inconsistencies
  5. 5Missing fire rating details
  1. 1ADA accessibility code violations
  2. 2Accessibility code compliance gaps
  3. 3Accessible route conflicts
  4. 4Accessibility requirement deficiencies
  5. 5Missing accessibility details
  1. 1Local building code violations
  2. 2Local code requirement conflicts
  3. 3Local code compliance gaps
  4. 4Missing local code requirements
  5. 5Local code specification inconsistencies
  1. 1Seismic code compliance issues
  2. 2Energy code compliance gaps
  3. 3Specialty code requirement deficiencies
  4. 4Missing specialty code information
  5. 5Specialty code specification conflicts

2,200

issue-title matches

5.4% of 40,500 structured public records

What the published dataset shows about codes and standards

This disclosed pattern covers explicit code terms, model-code acronyms, and commonly referenced design standards; it is not a code-violation rate.

Counts use disclosed, case-insensitive matching on published issue titles. Topic groups overlap and describe this sample; they are not industry-wide error rates.

Review the full dataset and methodology
Read the full guide▾

What AI building code compliance software does

AI building code compliance software reviews construction drawing sets against adopted codes before permit submission: surfacing violations with exact code citations, sheet references, and detail pointers.

Codes supported

InspectMind supports IBC 2018–2024, IFC/IMC/IPC/IECC, NFPA 13/70/72/101, ADA Standards, California and Florida adoptions, North Carolina 2024, and custom uploads for local amendments and owner standards.

What the checker flags

  • Missing occupancy classification and construction type documentation
  • Fire-rated assembly and egress documentation gaps
  • Accessibility route and clearance issues
  • Energy and mechanical code documentation omissions
  • Outdated code edition references on sheets

See published examples and a review checklist for fire and life-safety drawing errors, including egress, rated assemblies, and missing safety documentation.

How it differs from municipal plan review

InspectMind is private-sector pre-submission review. It helps teams catch likely violations before the AHJ queue, it does not replace official jurisdiction approval. Pair with plan check for submission readiness and ADA checker for accessibility depth.

Who uses this checker

Architects, structural/civil/MEP engineers, contractors, code consultants, and developers preparing permit packages.

Frequently asked questions

Can I upload local amendments?

Yes, local PDFs and owner standards are included alongside baseline libraries.

Turnaround?

Most reviews return within hours depending on set size.

File types?

PDF drawings and specs, no BIM model required.

Codes We Support Today

InspectMind AI already supports the most common IBC, state, and specialty codes out of the box. You can also upload your own local amendments, owner standards, or project-specific requirements, and we'll include them in the review.

Accessibility & ADA

  • 1990 ADA Standards

International & National Codes

  • 2018 International Building Code
  • 2018 International Fire Code
  • 2018 International Mechanical Code
  • 2018 International Plumbing Code
  • 2018 IECC – Commercial
  • 2018 IECC – Residential
  • 2020 National Electrical Code (NFPA 70)
  • 2021 International Building Code
  • 2021 International Existing Building Code
  • 2021 International Fire Code
  • 2021 International Mechanical Code
  • 2021 International Plumbing Code
  • 2024 International Building Code

California Codes

  • 2019 CALGreen
  • 2019 California Building Code
  • 2019 California Mechanical Code
  • 2019 California Plumbing Code
  • 2022 California Building Code
  • 2022 CA Building Energy Efficiency Standards
  • 2022 CA Existing Building Code
  • 2022 CA Green Building Code
  • 2022 CA Residential Code
  • 2022 California Electrical Code
  • 2022 California Energy Code
  • 2022 California Fire Code
  • 2022 California Mechanical Code
  • 2022 California Plumbing Code
  • 2025 California Building Code – Volume (in progress)

Florida Building Code

  • 2023 FBC – Accessibility
  • 2023 FBC – Building
  • 2023 FBC – Mechanical
  • 2023 FBC – Plumbing
  • 2023 FBC Mechanical Section 1003
  • 2023 FBC Mechanical Section 506
  • 2023 FBC Mechanical Section 508

North Carolina

  • 2024 North Carolina Building Code

Standards

  • IBC-referenced structural load standards (e.g. minimum design loads for buildings)

Don't see a code you need? We can usually add new codes quickly. You can also upload your own code PDFs, local amendments, or internal standards and we'll include them in the checks for your projects.

Frequently Asked Questions

What issues can it catch?

Does it remove the need for plan check?